金沙江干热河谷生态问题与退耕还林技术模式的研究

通过对金沙江干热河谷生态环境和经营条件分析，提出适合金沙江流域不同海拔和立地条件的退耕还林的技术模式，论述了经济林模式、生态林模式、用材林模式和林草混交立体模式的适用立地条件、造林树种、经营技术及经济效益。     

金沙江干热河谷退耕还林与生态问题的研究

通过对金沙江干热河谷生态环境和经营条件详细分析，具体提出适合金沙江流域不同海拔和立地条件的退耕还林的技术模式，论述了经济林模式、生态林模式、用材林模式和林草混交立体模式的适用立地条件、造林树种、经营技术及经济效益。     

热泵木材干燥机的发展与应用

阐述了应用热泵木材干燥机干燥木材的工作原理及其优越性，介绍了几种热泵木材干燥机的流程及其应用，并对各种热泵木材干燥机流程的特性进行了分析和探讨。     

Wood Moisture Content Measurement by X-Ray Exposure Method

lNTRoDUCTIONTheon-sitcnon-dcstructit'cmcasurcl11cntofu.oodmoisbocontcntattTactsgrcatintcrcsts.Itpla3'simpor-tantpartsinthescicntificrcscarchsucl1asonthchcatandmasstransportproccssesint"ooddri'ing.thcim-pregnationofliquidinxt'ood.thcmoisturccontcntdistri-b…     

Root exposure effects on water relations of Eucalyptus nitens nursery stock

Bare-root seedlings of Eucalyptus nitens frequently exhibit water stress after planting resulting in leaf lamina damage and reduced leaf area. Two trials examined effects of root exposure and desiccation between lifting and transplanting on post-planting water relations, leaf retention and root growth. Plants with roots exposed on a glasshouse bench initially lost water rapidly. In one trial ₁ declined to around –2.0 MPa within 2.5 h, after which there was no further change with exposure up to 7.5 h. In the second trial, the initial decline in ₁ was more rapid, reaching below –2.0 MPa in the first hour, before remaining stable with continuing exposure up to 4.5 h. A further decline then continued to –4.0 MPa after 7.5 h.Two days after transplanting into potting mix, day – time leaf water potentials in all desiccation treatments had declined to near –2.0 MPa. Hydraulic resistivity, measured as leaf specific resistivity two days after transplanting, increased following exposure for greater than 2.5 h, but there was no further increase between 4.5 and 7.5 h. The increase in resistivity corresponded with leaf water potential declining below –2.0 MPa during exposure.In the second trial, increasing root exposure time resulted in decreased leaf area due to lamina necrosis. Root growth, measured three weeks after planting, was also reduced. and there was also a positive curvilinear relationship between leaf area remaining at three weeks and new root growth. The results are discussed in terms of hardiness and the management of E. nitens seedlings from nursery to plantation.     

辐射松引种栽培综述

辐射松(PinusradiataD.Don)原产于加利弗尼亚海岸,被引种到世界各地,现在是南半球主要的人工林造林树种。1990年以来辐射松被引种到长江上游四川省阿坝州的干旱河谷地区,幼树的成活和早期生长表现良好。本文的主要内容包括:辐射松在原产地和引种地的生长情况,种源和遗传上的差异,环境限制因子和辐射松的气候生境,病虫害,引种不成功的经验教训以及辐射松在生态恢复中的应用。文中还简述了辐射松在阿坝干旱河谷地区的早期生长情况,列举了在长江上游干旱河谷地区引种辐射松可能遇到的问题以及所需开展的研究。图4表5参90。     

河南桧柏嫩枝“全光雾”扦插育苗试验初报

河南桧柏采用嫩枝“全光雾”扦插育苗，试验表明：对难生根珍贵树种用此法育苗可大大缩短育苗周期，提高苗木产量和质量，应大力推广此种育苗方法。     

甘蔗叶干法厌氧发酵工艺研究

为实现甘蔗叶的能源化利用,采用干法厌氧发酵方法研究发酵原料总固体含量为20%时,不同接种量、草粪比以及发酵温度对甘蔗叶产气量和产甲烷的影响。结果表明：接种量在30%和40%时发酵可以正常启动,接种量为40%时总产气量最高,但发酵后期甲烷含量下降很快;草粪比为1∶1和2∶1时总产气量高,甲烷含量均在60%以上,产气效果明显好于草粪比为1∶0的处理组;发酵温度为35℃时,总产气量和甲烷含量最高,发酵温度为30℃和40℃时总产气量相差不大。甘蔗叶干法厌氧发酵产沼气效果较好的工艺参数为：接种量30%、草粪比1∶1和发酵温度35℃。各处理组在甲烷含量达到最高值之前,甲烷含量与发酵时间之间呈现很强的线性相关性。产气高峰过后,虽然日产气量明显下降,但气体中甲烷含量下降幅度不大。     

旱作多功能精密穴播轮的研究

通过旱作多功能精密穴播轮工作机理的研究,建立了容种、充种、清种、成穴过程相关数学模型,揭示了穴播轮转速、容种高度对播种质量的影响规律。